QC Inspector (I&C)

Job Summary

• Identify and initiate complex site inspections, acceptance, and/or rejection of work performed by a various disciplines in compliance with applicable Codes and/or specifications.

• Monitors construction schedule and costs.

• Provide technical guidance to Quality Inspectors or other Quality Specialists.

• Actively promote implementation of QC policies and standards in the support of projects.

• May be responsible for oversight of other Field QC staff on assigned project Sites

Key Responsibilities

• Quality inspection on material, works, etc.

• Witness quality tests

• Assist engineer in reviewing drawings, method statement, HIRARC, and other relevant construction documentation.

• Assist engineer in reviewing inspection & test plan, inspection checklist & documentation, QC report, etc.

• Attending quality meetings and technical meetings.

• Provide necessary technical input/advice/recommendation on construction issues such as design changes, non-conformance, deviation, sequence of work, subsurface conditions, etc.

Management Responsibilities

• Minimum ten (10) years working experience in relevant projects, especially in Combined Cycle Power Plant (CCPP) is advantage.

• Familiar with the relevant regulations of the Construction, Commissioning, Operation, Specifications and Procedures of Combined Cycle Power Plants.

• Working knowledge of HSSE standards and compliance.

• Able to communicate in the English language; with Mandarin language is an advantage.

Minimum Qualifications

• Minimum of 3 years with a degree, minimum of 5 years without a degree.

Physical Demands:

• Lift and carry heavy items weighing up to 50 pounds.

• Stand, Kneel, Bend, Stoop, Move, and Walk long distances in and around confined, cluttered places, and uneven areas. • See and hear naturally or with correction.

• Full range of motion and flexibility consistent with requirements of the job duties.

• Requires using hands to handle, control, or feel objects, tools or controls according to a set procedure.

• Requires repetitive movement.

• May require work above 5 feet in height.

• Climb and maintain balance on steel framework, stairs, ladders and scaffolds.

• Work up to a 12 hour shift doing hard physical labor in varying temperature extremes and other outside conditions.

Work Environment:

• Typical construction site environment:

• Requires working in cramped work spaces and getting into awkward positions.

• Requires working in very hot (above 90 F degrees) or very cold (below 32F degrees) temperatures and exposure to inclement weather such as dust, wind, snow, rain, etc.

• Requires working in extremely bright or low lighting conditions

• Includes exposure to sounds and noise levels that are distracting or uncomfortable.

• Work around hazardous equipment.

• Typical office environment.

• This position is considered a safety sensitive position.